The Appropriate Way of Using Vehicle Lift

 

 The grease of the vehicle lift stage hardware straightforwardly influences the typical activity of every system, and it is firmly identified with the augmentation of the vehicle lift stage life range and security creation.

 Support While Using Vehicle Lift

 Routinely check whether each turning part is working ordinarily and regardless of whether there is any unusual sound. Once found, dispose of it on schedule.

 Routinely check whether the functioning strain of the pressure driven framework is ordinary and regardless of whether there is any spillage ready to go. Once found, eliminate it on schedule.

 Check whether the administrator utilizes the hardware as per the working strategies, and speedily guide if any issues are found.

 

The primary design of the principle body and the aide rail type lifting stage will be completely investigated to some degree once at regular intervals.

 Check all the interfacing bolts, particularly the associating electrical discharges guide outline, the aide rail and the table, give incredible consideration to it, and there should be no detachment.

 The upkeep time of the chain is a half year for safe use.

 Safe utilization of electrical machines and upkeep time of 3-5 months

 Habitually check the all over stroke switch of the electric moving screen entryway of the vehicle lift platform, add greasing up oil to the stroke regulator to keep up with ordinary and great activity. Moreover, the administrator physically controls the moving entryway, actually takes a look at the activity of the gadget, and really looks at the here and there strokes. Switch position so the electric moving shade entryway is in the legitimate position when it is opened or shut. During the review cycle, the electric moving shade entryway ought to be completely kept from garnish or lining or turning around. On the off chance that a crisis happens, quickly remove the ability to stop the activity of the vehicle lift stage, and contact upkeep faculty.

 

 

Troubleshooting of Vehicle Lift

The lifting speed of the vehicle lift platform has slowed down, so adjust the overflow valve by you. After the relief valve was adjusted, the lifting speed did not increase, but the vehicle lift freight elevator failed to stop the operation.

Improper use or aging, and the use of guide rail elevators for dirt has slowed down. After the speed slows down, first consider the factor of hydraulic oil flow. Factors affecting the flow of hydraulic oil include: hydraulic pipelines, hydraulic valves, hydraulic oil pumps, motor speed control devices, etc.

The overflow valve is generally placed inside the pump station with an adjustment valve on one side. Its function is to prevent the hydraulic system pressure from being too high and to protect the hydraulic system settings. It is dangerous to simply set the overflow valve. If the pressure in the oil cylinder or the oil pipe is too high, serious failures of blasting may occur. The customer of the rail-type elevator freight elevator stopped the failure because of self-adjusting the overflow valve.

The hydraulic system pressure should be checked only when the guide rail elevator cannot be started with load. If the pressure is lower than the normal range, the overflow valve setting value can be adjusted.

The hydraulic oil has deteriorated or has impurities. After the hydraulic oil has been used for a long time, there may be impurities or deterioration in the hydraulic oil. Take a sample and check to see if it contains solid particles, discoloration, or odor. Replace the hydraulic oil if necessary.

The hydraulic pipeline may be blocked. The hydraulic pipeline is also a very important link. Check whether the hydraulic pipeline is unblocked. The editor reminds everyone to focus on checking whether each hydraulic valve, including one-way stop valve, electromagnetic reversing valve, proportional control valve, overflow valve, etc., is blocked or stuck. If there is a problem, clean or replace the hydraulic valve in time.

Hydraulic pump is also an important factor affecting hydraulic oil flow. Hydraulic pumps that have been used for too long are also prone to problems. When the speed of the hydraulic lifting platform slows down, check whether the oil supply flow of the hydraulic pump is stable. If you find any problems, contact the manufacturer in time to avoid the warranty period.

There may be leakage in the hydraulic system. Check the hydraulic system for leaks, and focus on the connections of hydraulic pipes and joints, cylinders, and hydraulic valves. If hydraulic oil leaks, replace the composite pad or wrap the raw material tape.